LIST OF CURRENT M ENG/Ph D CANDIDATES
Manufacturing Division
Department of Mechanical Engineering
|
NAME |
REG DATE |
DEG |
RESEARCH TOPIC |
SUPERVISOR |
|
Xiao Taikang (p/t) |
13.05.96 |
MEng |
Optimal Clamping Force Analysis & Software
Implementation For NC Intelligent Fixturing |
MA Mannan AS Kumar |
|
Goh Thiam
Hock |
04.07.98 |
MEng |
Mass Custormization On
The Internet |
EH |
|
Sunil Hiranniah |
25.07.98 |
MEng |
Web Based Teaching Of Mechanical Vibrations With
Emphasis On Multiple Degree Freedom Systems |
MA Mannan |
|
*Ramakrishnan Ramesh (p/t) |
05.08.98 |
PhD |
Measurement & Modelling
Of Machine Tool Thermal Error Under Varying Operating Conditions |
MA Mannan AN Poo |
|
Rakesh Menon (p/t) |
06.08.98 |
PhD |
Data Mining Of Field Failure Databases For Product
Development Improvement |
HT Loh Sathiya Keerthi AC Brombacher |
|
*Joseph Raj Sahaya Prakash (p/t) |
31.08.98 |
PhD |
Theoretical Modelling
& Experimental Investigation Of Micro Milling |
M Rahman Senthilkumar |
|
Md Ariful
Islam (p/t) |
06.04.99 |
MEng |
Voice Of Customer In Product Creation Process
Through The Service Dept Of A Manufacturing Organization |
HT Loh |
|
Lim Lim Hwee, Daniel |
19.07.99 |
MEng |
Modelling Of Chemical-Mechanical
Polishing |
M Rahman AS Kumar |
|
Yang Yong (p/t) |
03.09.99 |
PhD |
Rapid Prototyping & Manufacturing |
HT Loh Jerry Fuh |
|
Zhang Yi (p/t) |
02.10.99 |
MEng |
Tool Information Management System |
MA Mannan AN Poo |
|
Bok Shung
Hwee (p/t) |
12.10.99 |
PhD |
Internet-Based Computer-Aided Design |
AYC Nee YS Wong AS Kumar |
|
Sun Yifeng (RS) |
23.12.99 |
PhD |
Die & Mold Design & Manufacture |
AYC Nee KS Lee |
|
Arulnachalan Ramanathan (RS) |
27.12.99 |
PhD |
A Study Of The Machinability
Of Age Hardened Ineonel 718 On The Facing Operation
& Study Of The Residual Stresses |
Mannan |
|
*Zhu Haihong, Mdm |
24.01.00 |
PhD |
Processing & Characterization of Cu-based
material system for direct Laser Sintering |
Jerry Fuh |
|
NAME |
REG DATE |
DEG |
RESEARCH TOPIC |
SUPERVISOR |
|
Johannes Adrianus van
den Bogaard (NUS-Tue Scholarship) |
01.04.00 (08.01.01) |
PhD |
A Method For Early Reliability Optimization |
HT Loh TN Goh AC Brombacher |
|
*Roshan Shivanand Gaonkar (p/t) |
25.05.00 |
PhD |
Dynamic Configuration & Synchronization Of
Collaborative E-Supply Chain Networks |
|
|
Chan Mei Lin (p/t) |
07.07.00 |
MEng |
Dynamic & Static Characterization Of Microfabricated Resonating Structures |
EH FS Chau |
|
Zhang Zhen (Ms) |
08.07.00 |
MEng |
A Tool Condition Monitoring Approach Based On SVM |
YS Wong GS Hong |
|
Lin Qi (RS-Gintic) |
10.07.00 |
PhD |
A Step-Based Integrated Framework For CAD/CAM
Applications |
AYC Nee SK Ong |
|
*Kader Mohideen Fathima Pathma (RS) |
12.07.00 |
PhD |
Experimental Investigations, Modeling &
Simulation Of Ductile Mode Grinding Of Difficult To Machine Materials Using Elid |
M Rahman AS Kumar |
|
Huang Zhaohong (p/t) |
15.07.00 |
PhD |
Rapid Tooling |
Jerry Fuh YS Wong |
|
*Zhang Liping, Mdm (RS) |
11.08.00 |
PhD |
Computer-Aided Mold Design Modification & Tool
Path Regeneration For Product Change |
AYC Nee Jerry Fuh |
|
*Mani Mahesh (RS) |
16.08.00 |
PhD |
Rapid Prototyping & Manufacturing (RP&M)
Benchmarking |
YS Wong Jerry Fuh |
|
Sun Weiwei |
31.08.00 |
MEng |
Application Of |
SK Ong |
|
Wang Jiao, Ms (RS) |
28.12.00 |
MEng |
Intelligent Manufacturing |
YF Zhang AYC Nee |
|
*Ning Yu (RS) |
02.01.01 |
PhD |
Process Parameter Optimization For DMLS Process |
Jerry Fuh YS Wong |
|
Rawther Ashique
Hameed |
11.01.01 |
MEng |
Control & Measurement Of Clamping &
Machining Forces In Intelligent Fixturing |
MA Mannan AYC Nee |
|
Liu Fengmin (p/t) |
27.01.01 |
MEng |
Material & Process Study On Rapid Tooling |
Jerry Fuh YS Wong/ |
|
Hu Qiujun |
08.02.01 |
MEng |
Thermal Treatment Of M2 High-Speed Steel For Rapid
Tooling Applications |
Jerry Fuh |
|
Rishi Jain (RS) |
30.05.01 |
MEng |
Sensors & Instrumentation |
MA Mannan Simon Ang |
|
NAME |
REG DATE |
DEG |
RESEARCH TOPIC |
SUPERVISOR |
|
*Fathianathan Mervyn (RS-Aug) |
18.06.01 |
PhD |
Development Of A Virtual Assembly Evaluation
Environment |
A Senthilkumar AYC Nee |
|
Tan Hwee Lynn, (RS) |
06.07.01 |
MEng |
Rapid Prototyping |
HT Loh YF Zhang |
|
Ho Chin Kian, Ivan (RS-Gintic) |
07.07.01 |
MEng |
Enhancement Of The Accuracy Of AC-Induction
Motor-Based CNC Machine Tool Feed Drives Using Neuro-Fuzzy
Control |
MA Mannan Panda Gong Zhi Ming |
|
Fan Liqing (RS-Aug) |
09.07.01 |
MEng |
Computer Aided Fixture Design |
A Senthilkumar |
|
Wang Guoxian (RS-IHPC) |
09.07.01 |
PhD |
A Web-Based Intelligent Concurrent Design &
Manufacturing System For Sheet Metal Parts Using Progressive Dies |
AYC Nee Lu Chun |
|
Chong Foh Wooi (RS) |
10.07.01 |
MEng |
Internet CAD System |
EH |
|
Tan Yee Tit, Ernest (RS-Aug) |
10.07.01 |
MEng |
Development Of An Intelligent Fixture Design
System |
A Senthilkumar Jerry HS Fuh |
|
(RS-Aug) |
11.07.01 |
MEng |
Development Of A Micro Composite Wire MEG Sensor |
XP Li |
|
Yu Shuhui Ms (RS-IMRE) |
19.07.01 |
PhD |
Nanomaterial or Biomaterial |
EH |
|
(RS) |
23.07.01 |
MEng |
Precision Machining |
M Rahman |
|
Wang Binfang, Ms (p/t) |
23.07.01 |
MEng |
Feature Extraction & Process Planning For
Casting & Forging Parts |
Jerry YH Fuh YF Zhang |
|
NAME |
REG DATE |
DEG |
RESEARCH TOPIC |
SUPERVISOR |
|
Woon Yong Khai (RS) |
23.07.01 |
MEng |
Die & Mold Design |
KS Lee |
|
Wu Yifeng, Ms (RS) |
23.07.01 |
MEng |
Reverse Engineering |
HT Loh YS Wong |
|
Zhang Wei, Ms (RS) |
23.07.01 |
MEng |
Reverse Engineering |
YF Zhang |
|
Yong Yun Leong, Andrew (RS) |
01.08.01 |
MEng |
Cryogenic Treatment Of Tool Materials |
Winston Seah |
|
Du Xiaojun, Ms (RS) |
17.08.01 |
MEng |
Precision Engineering |
KS Lee YS Wong |
|
Zhou Rong, Mdm (RS-IHPC) |
07.09.01 |
MEng |
Process Planning For Machining Of Arbitary Objects Using Novel Techniques |
AYC Nee HP Lee |
|
Geng Li, Ms (RS-Aug) |
19.11.01 |
MEng |
Rapid Product Development |
HT Loh YS Wong |
|
Nachiappan Ravi (RS-Gintic) |
26.11.01 |
PhD |
Micro Electro-Machining Based Process |
YS Wong M Rahman Huan Han |
|
*Wang Zhigang (RS) |
18.12.01 |
PhD |
Optimization Of Multi-Pass Milling Using Genetic
Algorithm & Genetic Simulated Annealing |
M Rahman YS Wong |
|
Cheo Koon
Lin (RS) |
02.01.02 |
MEng |
Parametric Amplification in MEMS |
EH FS Chau |
|
Lai Woon Siong, Alan |
07.01.02 |
MEng |
Impact Of New Wireless-Identification Technologies
On Supply Chain Network Performace |
Viswan |
|
NAME |
REG DATE |
DEG |
RESEARCH TOPIC |
SUPERVISOR |
|
Phang In Yee (RS-IMRE) |
12.01.02 |
MEng |
Nano Composite Material
Development |
Jerry Fuh CB He |
|
Nyan Myo
Naing (RS) |
01.02.02 |
MEng |
Control Of MEMS Devices |
Francis Tay Winston Seah |
|
Low Leng Hwa, Maria (RS) |
07.06.02 |
PhD |
Application Of CAD In Mould Design |
KS Lee |
|
Atiqur Rahman (RS) |
22.07.02 |
MEng |
CAD/CAM |
KS Lee |
|
Avijit Roy (RS) |
22.07.02 |
PhD |
Collaborative CAD (COCAD) |
EH Wieslaw L Nowinski |
|
Cao Jian,
Ms (RS) |
22.07.02 |
MEng |
CAD/CAM |
KS Lee/YS Wong |
|
Chen Jer Ming (RS) |
22.07.02 |
MEng |
Cryogenic Treatment Of Musical Instruments |
Winston Seah CH Chew |
|
Chen Xiaolong (RS-Gintic) |
22.07.02 |
MEng |
A Distributed CAD Technology In Internet |
YS Wong Jerry Fuh Lu Yiqiang |
|
Gao Chunping (RS) |
22.07.02 |
MEng |
Internet Based Manufacturing & Design Of Microsensor |
EH |
|
He Tao (RS) |
22.07.02 |
MEng |
Development Of A Nanomachining
Technology For Wafer Fabrication |
XP Li M Rahman |
|
Khairul Habib (RS) |
22.07.02 |
MEng |
Nanofabrication (Combination Of Manufacturing
& Materials |
EH HT Chua |
|
NAME |
REG DATE |
DEG |
RESEARCH TOPIC |
SUPERVISOR |
|
Khandaker Mostafa
Rezaur Rahman (RS) |
22.07.02 |
MEng |
Precision Machining |
M Rahman |
|
Khoo Boon Bing (RS) |
22.07.02 |
MEng |
Development Of An E-Manufacturing Application |
KS Lee YS Wong |
|
Li Lingling, Ms (RS) |
22.07.02 |
MEng |
Intelligent CAD |
YF Zhang |
|
Lu Cong (RS-Gintic |
22.07.02 |
PhD |
Development Of Key Technologies For Supporting
Distributing CAD System |
Jerry Fuh YS Wong |
|
Mohammad Sharif Uddin (RS) |
22.07.02 |
MEng |
Machining Of Inconel |
Winston Seah |
|
Mohammed Tauhiduzzaman (RS) |
22.07.02 |
MEng |
Ultra-Precision Machining |
M Rahman A Senthilkumar |
|
Muhommad Azizur
Rahman (RS) |
22.07.02 |
MEng |
Ultra-Precision Machining |
M Rahman A Senthilkumar |
|
Poornima Ananda (s/s) |
22.07.02 |
MEng |
Supply Chain Networks |
|
|
Saravanakumar Mohanraj (RS) |
22.07.02 |
MEng |
Sequencing & Scheduling InMould
Manufacturing Shop |
KS Lee |
|
Seet Hang Li (RS-DSTA) |
22.07.02 |
MEng |
Study Of The Composition For The Sensitivity Of
Micro Composite Meg Sensors |
XP Li Simon Ang |
|
Shamsul Arefin (RS) |
22.07.02 |
MEng |
Ductile Mode Machining Of Brittle Materials |
XP Li M Rahman |
|
NAME |
REG DATE |
DEG |
RESEARCH TOPIC |
SUPERVISOR |
|
Tan Wee Yong, Allan (RS) |
22.07.02 |
MEng |
Laser Machining Of Polymers For MEMS Application |
EH Zhang Jian |
|
(RS) |
22.07.02 |
MEng |
Data Mining |
HT Loh |
|
Zhao Yi (RS) |
22.07.02 |
MEng |
MEMS Modeling |
EH FS Chau |
|
Alagappan Palaniappan (RS-IMRE) |
31.07.02 |
MEng |
MEMS Device |
EH Su Xiaodi |
|
Md Enamul
Hoque (RS) |
06.01.03 |
PhD |
Design, Fabrication & Characterization Of
Scaffold For Culturing Of Mesenchymal Adult Stem
Cells |
YS Wong Dietmar Hutmacher |
|
Mohammad Majharul Islam (RS) |
06.01.03 |
MEng |
Micro Machining |
A Senthilkumar |
|
Muhammad Ibrahim Khan (RS) |
06.01.03 |
MEng |
Design & Development Of A Miniature Machine
Tool For Ultra-Precision Machining |
M Rahman A Senthilkumar |
|
Shen Kaiquan (RS) |
06.01.03 |
MEng |
Pattern Recognition & Monitoring Of Brain Activites |
XP Li |
|
Tabassumul Haque (RS) |
06.01.03 |
MEng |
Micro Machining |
A Senthilkumar |
|
Xu Qianli (RS) |
06.01.03 |
PhD |
Design Reuse |
AYC Nee SK Ong |
|
Yu Liming (RS) |
06.01.03 |
PhD |
Mechatronics, Manufacturing
&Control |
EH |