Associate Professor SK Ong's International Conference Publications

Note: If you wish to have a copy of any of the publications listed below, please send an email to Professor SK Ong at mpeongsk(at)nus.edu.sg.

 

  1. A Computer-Aided Gating System Design for Plastic Injection Moulds.
    S. K. Ong, S. Prombanpong and K. S. Lee, 1992, Proceedings of the 2nd International Conference on Die & Mould Technology, ICDMT'92, Singapore, 726 -- 739.
  2. Set-up Planning: A Pre-Planning Process for CAPP and CAFP.
    S. K. Ong and A. Y. C. Nee, 1994, Proceedings of the 7th International Conference on Precision Engineering, ICPE'94, Japan, 112 -- 119.
  3. A New Approach to Fixture Planning via Feature-to-Feature Mappings.
    S. K. Ong and A. Y. C. Nee, 1995, Proceedings of the 7th International Manufacturing Conference with China (IMCC'95) in 19-21 October 1995, Harben, China, Keynote Address, 501 -- 508.
  4. A Systematic Approach for Analysing the Fixturability of Parts for Machining.
    S. K. Ong and A. Y. C. Nee, 1995, Proceedings of the ASME Winter Annual Meeting (IMECE'95) in 12-17 November 1995, San Francisco, USA, 747 -- 762.
  5. Automating Set-up Planning in Machining Operations.
    S. K. Ong and A. Y. C. Nee, 1996, Journal of Materials Processing Technology (Special Issue Containing Proceedings of Asia Pacific Conference on Material Processing in 1996, APCMP'96, Hong Kong, Keynote address), Vol 63, No. 1.
  6. A Framework for Integrated Tele-Cooperative Manufacturing.
    S. K. Ong and A. Y. C. Nee, 1998, Proceedings of the 8th International Manufacturing Conference in 12-14 May 1998, IMCC'98, Singapore, 169 -- 174.
  7. A Systematic Approach for Evaluating the Manufacturability of Machined Parts and Their Set-ups Plans.
    S. K. Ong and L. C. Chew, 1998, Proceedings of the CIRP International Seminar on Intelligent Computation in Manufacturing Engineering in 1-3 July 1998 , Session Keynote Paper, Capri, Naples, Italy, 489 -- 496.
  8. A VRML-Java-Based Approach to Teaching APT Programming.
    S. K. Ong and M. A. Mannan, 1999, Proceedings of the 1999 AEESEAP Midterm Conference, 12-14 May 1999, Bangkok, Thailand, 18 -- 27.
  9. Technology & Innovation Management Strategies for Green Manufacturing.
    A. Sharma, S. K. Ong and A. Y. C. Nee, 1999, Proceedings of the Portland International Conference on Management of Engineering and Technology, PICMET'99, 25-29 July 1999, Portland, Oregan, United States.
  10. Environmental Life Cycle Cost Analysis of Products
    D. Senthil Kumaran, S. K. Ong and A. Y. C. Nee, 2000, Proceedings of the International Conference & Exhibition on Life Cycle Assessment: Tools for Sustainability, InLCA, 25-27 April 2000, Virgina, USA, p150.
  11. A Fuzzy-Set-AHP-Based DFM Tool for Rotational Parts
    S. K. Ong, M. J. Sun and A. Y. C. Nee, 2000, Proceedings of IMCC'2000 International Manufacturing Conference in China, 16-17 August 2000, Hong Kong, 9 -- 10.
  12. An Incremental Interacting Feature Recognition Approach Based on Design-by-Feature
    W. D. Li, S. K. Ong and A. Y. C. Nee, 2000, Proceedings of 33rd International MATADOR Conference, 13-14 July 2000, UMIST, UK, 101 -- 106.
  13. Tool to Incorporate Environmental Cost into Life Cycle Assessment
    D. Senthil Kumaran, S.K. Ong, R.B.H. Tan and A.Y.C. Nee, 2000, Proceedings of SPIE: Environmentally Conscious Manufacturing, Vol. 4193, 6-8 November 2000, Boston, USA, 124 -- 134.
  14. A Generalized Cost-Estimation Modeling Method for the Gear Manufacturing Industry
    Y.F. Jiang, S.K. Ong and A.Y.C. Nee, 2000, Proceedings of Seminar on Engineering Advances at the Dawn of the 21st Century, 8-9 December 2000, Singapore, 415 -- 422.
  15. A Web-Based Manufacturing Resource Management System
    T. Girish, S.K. Ong and A.Y.C. Nee, 2000, Proceedings of Seminar on Engineering Advances at the Dawn of the 21st Century, 8-9 December 2000, Singapore, 555 -- 560.
  16. Assessing Environmental Impact of Materials Processing Techniques using an Analytic Hierarchy Process Method
    S.K. Ong, T.H. Koh and A.Y.C. Nee, 2001, Proceedings of the 5th Asia Pacific Conference on Materials Processing, 25-27 June 2001, Seoul, Korea.
  17. A Multi-agent Concurrent Design and Manufacturing System
    J.Y.H. Fuh, H.Z. Jia, Y.F. Zhang, S.K. Ong, Y.S. Wong and A.Y.C. Nee, 2002, Proceedings of International Manufacturing Leaders Forum, IMLF, 7-9 February 2002, Australia.
  18. Establishment of Distributed Design Environment
    W.D. Li, S.K. Ong and A.Y.C. Nee, 2002, Proceedings of the 9th ISPE International Conference on Concurrent Engineering: Research And Applications, CE2002, 27-31 July 2002, UK, 605 -- 612.
  19. Towards Collaboratively Integrated Manufacturing System for Tooling Production in SMEs - The INPROSE Approach
    X.G. Ming, Q.F. Ni, W.F. Lu, I.B.H. Lee, M.W. Fu, S.K. Ong and A.Y.C. Nee, 2002, Proceedings of the 9th ISPE International Conference 0n Concurrent Engineering: Research And Applications, CE2002, 27-31 July 2002, UK, 465 -- 474.
  20. A Web-Based Interactive Teaching Package in Manufacturing Engineering
    S.K. Ong and M.A. Mannan, 2002, Proceedings of the International Conference on Engineering Education 2002, ICEE2002, 18-22 August 2002, UK, CDROM.
  21. A Distributed Feature-based Environment for Collaborative Design
    W.D. Li, Y.Q. Lu, H. Zhou, S.K. Ong, A.Y.C. Nee, J.Y.H. Fuh and Y.S. Wong, 2002,Proceedings of the 6th World Multiconference on Systemics, Cybernetics and Informatics, SCI2002, 14-18 July 2002, Orlando, USA, 69 -- 74. Best Paper Award
  22. Knowledge-based Object-oriented Modelling of Product Families to Support Mass Customisation
    Q. Lin, S.K. Ong and A.Y.C. Nee, 2002,Proceedings of the CIRP Design Seminar, Design in the E-Commerce Economy, 16-18 May 2002, Hong Kong, CDROM.
  23. A multi-agent-based agile scheduling model for a virtual manufacturing environment
    Zhou, D., Wang, H.H., Chen, Y.P., Liu, Q., Ong, S.K., Fuh, J.Y.H. and Nee, A.Y.C., 2002, Proceedings of the Second IASTED International Conference; Artificial Intelligence and Applications, 9-12 September 2002, Malaga, Spain, 132 -- 137.
  24. A Tabu Search-based Optimization Approach for Process Planning
    W.D. Li, S.K. Ong, Y.Q. Lu and A.Y.C. Nee, 2003, Proceedings of the 7th International Conference of Knowledge-based Intelligent Information and Engineering Systems, 3-5 September 2003, Oxford University, Oxford, UK, 1000 -- 1007.
  25. Registration Using Projective Reconstruction for Augmented Reality Systems
    M.L. Yuan, S.K. Ong and A.Y.C. Nee, 2004, Proceedings of SMA Symposium, 19-20 January 2004, Singapore, CD-ROM.
  26. A Web-based Process Planning Optimization System for Distributed Design
    W.D. Li, S.K. Ong and A.Y.C. Nee, 2004, Proceedings of International CAD Conference and Exhibition, CAD'04, 24-28 May 2004, Pattaya Beach, Thailand (CDROM).
  27. Registration Using Projective Reconstruction for Augmented Reality Systems
    S.K. Ong, M.L. Yuan and A.Y.C. Nee, 2004, Proceedings of ACM SIGGRAPH International Conference on Virtual-Reality Continuum & its Applications in Industry, SIGGRAPH VRCAI Conference, 16-18 June 2004, Singapore, 286 -- 291.
  28. The Virtual Interaction Panel: An Easy Control Tool in Augmented Reality Systems
    M.L. Yuan, S.K. Ong and A.Y.C. Nee, 2004, Proceedings of the 17th Annual Conference on Computer Animation & Social Agents, CASA2004, 7-9 July 2004, Geneva, Switzerland.
  29. Augmented Reality Applications in Manufacturing
    A.Y.C. Nee, S.K. Ong and M.L. Yuan, 2004, Proceedings of the International Manufacturing Conference with China, IMCC2004, keynote address, 18-20 September 2004, Jinan, Shandong, China, 8     - 16, Keynote Address.
  30. Design and Development of 3-DOF Modular Micro Parallel Kinematic Manipulator
    C.C. Ng, S.K. Ong and A.Y.C. Nee, 2004, Singapore-MIT Alliance Symposium, 19-20 January 2005, Singapore.
  31. Assembly Guidance in Augmented Reality Environments Using a Virtual Interactive Tool
    M.L. Yuan, S.K. Ong and A.Y.C. Nee, 2005, Singapore-MIT Alliance Symposium Symposium, 19-20 January 2005, Singapore.
  32. An Application of Augmented Reality (AR) in the Teaching of an Arc Welding Robot
    J.W.S. Chong, A.Y.C. Nee, K. Youcef-Toumi and S.K. Ong, 2005, Singapore-MIT Alliance Symposium Symposium, 19-20 January 2005, Singapore.
  33. Assembly Design and Evaluation in an Augmented Reality Environment
    Y. Pang, A.Y.C. Nee, K. Youcef-Toumi, S.K. Ong and M.L. Yuan, 2005, Singapore-MIT Alliance Symposium Symposium, 19-20 January 2005, Singapore.
  34. Facilitating Mechanical Design with Augmented Reality
    Y.L. Poh, A.Y.C. Nee, K. Youcef-Toumi and S.K. Ong, 2005, Singapore-MIT Alliance Symposium Symposium, 19-20 January 2005, Singapore.
  35. Towards a Generic Distributed Collaborative Digital Manufacturing
    M. Mahesh, S.K. Ong, A.Y.C. Nee, J.Y.H. Fuh and Y.F. Zhang, 2005, Proceedings of the International Manufacturing Leaders Forum, IMFL 2005, 27 February - 2 March 2005, Adelaide, Australia.
  36. Design Synthesis and Evaluation in a Design Reuse System
    Q.L. Xu, S.K. Ong and A.Y.C. Nee, 2005, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2005, 5-11 November 2005, Orlando, Florida, USA, Paper No. IMECE2005-79463 (CDROM).
  37. Tracking Points Using Projective Reconstruction for Augmented Reality
    S.K. Ong, M.L. Yuan and A.Y.C. Nee, 2005, Proceedings of the ACM SIGGRAPH International Conference on Computer Graphics and Interactive Techniques in Australasia and Southeast Asia,, 29 November     - 2 December 2005, Dunedin, New Zealand, 421 -- 424.
  38. Augmented Reality – Its Role and Applications in Manufacturing Engineering
    A.Y.C. Nee, S.K. Ong and M.L. Yuan, 2005, Proceedings of the 2005 International Conference on Advanced Manufacture, 28 November     - 2 December 2005, Taipei, Taiwan, Keynote Address.
  39. Robot Programming Using Augmented Reality (RPAR): An Interactive Methodology
    J.W.S. Chong, A.Y.C. Nee, S.K. Ong and K. Youcef-Toumi, 2006, Singapore-MIT Alliance Symposium Symposium, 16-19 January 2006, Singapore.
  40. Evaluation and Planning of Manual Assembly on Workstation in an Augmented Reality Environment
    Y. Pang, M.L. Yuan, A.Y.C. Nee, S.K. Ong and K. Youcef-Toumi, 2006, Singapore-MIT Alliance Symposium Symposium, 16-19 January 2006, Singapore.
  41. Augmented Reality for Facilitating Layout Design
    Y.L. Poh, A.Y.C. Nee, S.K. Ong and K. Youcef-Toumi, 2006, Singapore-MIT Alliance Symposium Symposium, 16-19 January 2006, Singapore.
  42. Markerless Registration using Affine Reconstruction
    Y. Pang, M.L. Yuan, A.Y.C. Nee, S.K. Ong and K. Youcef-Toumi, 2006, 7th Australasian User Interface Conference, AUIC2006, 16-19 January 2006, Hobart, Tasmania, New Zealand, 25 - 32.
  43. Agent-Based Distributed, Collaborative Pay-for-Use Design & Manufacturing
    A.Y.C. Nee and S.K. Ong, 2006, Grid Asia 2006, 16-19 May 2006, Singapore.
  44. Robot Programming and Assembly Design using Augmented Reality
    A.Y.C. Nee, S.K. Ong, Y. Pang and J.W.S. Chong, 2006, Proceedings of the International Manufacturing Conference with China on “Advances in Manufacturing Engineering, IMCC2006, ed. C.Y. Jiang, Northwestern Polytechnical University Press, ISBN 7-5612-2132-0, keynote address, 21-23 September 2006, Xian, Shaanxi, China, p. 4.
  45. A Volumetric Model-Based CNC Simulation and Monitoring System in Augmented Environments
    J. Zhang, S.K. Ong and A.Y.C. Nee, 2006, Proceedings of the International Conference on CYBERWORLDS, 28-30 Nov. 2006, Switzerland, 33 - 40.
  46. A Framework for Multiple-View Product Representation using Augmented Reality
    Y. Shen, S.K. Ong and A.Y.C. Nee, 2006, Proceedings of the International Conference on CYBERWORLDS, 28-30 Nov. 2006, Switzerland, 157 - 162.
  47. Methodologies For Immersive Robot Programming In An Augmented Reality Environment
    S.K. Ong, J.W.S. Chong and A.Y.C. Nee, 2006, Proceedings of the ACM SIGGRAPH 4th International Conference on Computer Graphics and Interactive Techniques in Australasia and South-East Asia, GRAPHITE 2006, 29 November-2 December 2006, Kuala Lumpur, Malaysia, 237 - 244.
  48. Markerless Augmented Reality Using a Robust Point Transferring Method
    S.K. Ong, M.L. Yuan and A.Y.C. Nee, 2007, Proceedings of the 13th International MultiMedia Modeling Conference, MMM 2007, 9-12 January 2007, Singapore, 258 - 268.
  49. Wearable Interface for the Physically Disabled
    Y.L. Chi, S.K. Ong, M.L. Yuan and A.Y.C. Nee, 2007, International Convention for Rehabilitation Engineering and Assistive Technology, i-CREATe, 23-26 April 2007, Singapore, 28 - 32.
  50. Assist Disabled to Control Electronic Devices and Access Computer Functions by Voice Commands
    X.T. Gao, S.K. Ong, M.L. Yuan and A.Y.C. Nee, 2007, International Convention for Rehabilitation Engineering and Assistive Technology, i-CREATe, 23-26 April 2007, Singapore, 37 - 42.
  51. An AR-assisted in-situ CNC Simulation Environment

S.K. Ong, J. Zhang, A.Y.C. Nee, 2007, 20th International Conference on Computer Animation and Social Agents, CASA2007, 11-13 June 2007, Hasselt, Belgium, 109 - 118.

  1. Multi-Agent Based Pay-Per-Use (PpU) Distributed Manufacturing
    P. Lou, S.K. Ong and A.Y.C. Nee, 2007, International Conference on Product Design and Manufacturing Systems, 12-15 October 2007, Chongqing, China.
  2. A Novel AR-Based Robot Programming and Path Planning Methodology

S.K. Ong, J.W.S. Chong and A.Y.C. Nee, 2007, International Conference on Product Design and Manufacturing Systems, 12-15 October 2007, Chongqing, China.

  1. An Improved Haptic Interface for Virtual Assembly Operations

C.J. Chen, A.Y.C. Nee, S.K. Ong, Y.Q. Zhou, B. Qiu, 2007, The 2nd Workshop on Digital Media and its Application in Museum & Heritage (DMAMH’2007), 10-12 December 2007, Chongqing Institute of Technology, Chongqing, P.R. China, 410-415.

  1. Navigation Systems for Individuals with Visual Impairment: A Survey
    J. Zhang, S.K. Ong and A.Y.C. Nee, 2008, International Convention for Rehabilitation Engineering and Assistive Technology, i-CREATe, Bangkok, Thailand from 13 - 15 May 2008, 159-162.
  2. An Augmented Reality System for Hand Movement Rehabilitation

Y. Shen, S.K. Ong, and A.Y.C. Nee, 2008, International Convention for Rehabilitation Engineering and Assistive Technology, i-CREATe, Bangkok, Thailand from 13 - 15 May 2008, 189-192.

  1. Tampered Image Detection using Image Matching

Z.H. Li, A.Y.C. Nee, S.K. Ong and W.G. Gong, 2008, 5th International Conference Computer Graphics, Imaging and Visualization, Penang, Malaysia, 26-28 August 2008, 174-179, ISBN 978-0-7695-3359-9.

  1. A Differential GPS Carrier Phase Technique for Precision Outdoor AR Tracking

W.T. Fong, S.K. Ong and A.Y.C. Nee, 2008, 7th IEEE and ACM International Symposium on Mixed and Augmented Reality, ISMAR 2008, Cambridge, UK, 15-18 September 2008, 25-28, ISBN 978-1-4244-2840-3.

  1. AR-Assisted in situ Machining Simulation: Architecture and Implementation
    J. Zhang, S.K. Ong and A.Y.C. Nee, 2008, ACM SIGGRAPH 7th International Conference on Virtual-Reality Continuum & its Applications in Industry, SIGGRAPH VRCAI Conference, 8-9 December 2008, Singapore (CDROM).
  2. Augmented Reality Based Collaborative Product Design

Y. Shen, S.K. Ong, and A.Y.C. Nee, 2008, ACM SIGGRAPH 7th International Conference on Virtual-Reality Continuum & its Applications in Industry, SIGGRAPH VRCAI Conference, 8-9 December 2008, Singapore (CDROM).

  1. Design and Development of a Navigation Assistance System for the Visually Impaired
    J. Zhang, S.K. Ong and A.Y.C. Nee, 2009, International Convention for Rehabilitation Engineering and Assistive Technology, i-CREATe, 22 - 26 April, Singapore 2009, CDROM.
  2. Hand Rehabilitation based on Augmented Reality

Y. Shen, S.K. Ong and A.Y.C. Nee, 2009, International Convention for Rehabilitation Engineering and Assistive Technology, i-CREATe, 22 - 26 April, Singapore 2009, CDROM.

  1. Assembly Design and Evaluation based on Bare-Hand Interaction in an Augmented Reality Environment
    Z.B. Wang, Y. Shen, S.K. Ong and A.Y.C. Nee, 2009, International Conference on CYBERWORLDS, 7-11 September 2009 University of Bradford, UK, accepted.
  2. Robot Programming using Augmented Reality

H.C. Fang, S.K. Ong and A.Y.C. Nee, 2009, International Conference on CYBERWORLDS, 7-11 September 2009 University of Bradford, UK, accepted.

 

 

Local Conference Papers

 

  1. A Proposed Framework for the Integration of Process Planning with Fixture Planning.
    S. K. Ong, S. Prombanpong, Y. F. Zhang and A. Y. C. Nee, 1993, Proceedings of the National Symposium on Manufacturing Technology, MANUTECH'93, Singapore, 190 -- 196.



Updated 8 June 2009

Back